Effect of plasma-activated water and buffer solution combined with ultrasound on fungicide degradation and quality of cherry tomato during storage

The purpose of this study was to examine plasma-activated buffer solution (PABS) and plasma-activated water (PAW) combined with ultrasonication (U) treatment on the reduction of chlorothalonil fungicide and the quality of tomato fruits during storage. To obtain PAW and PABS, an atmospheric air plasma jet was used to treat buffer solution and deionized water at different treatment times (5 and 10 min). For combined treatments, fruits were submerged in PAW and PABS, then sonicated for 15 min, and individual treatment without sonication. As per the results, the maximum chlorothalonil reduction of 89.29% was detected in PAW-U₁₀, followed by 85.43% in PABS. At the end of the storage period, the maximum reduction of 97.25% was recorded in PAW-U₁₀, followed by 93.14% in PABS-U₁₀. PAW, PABS, and both combined with ultrasound did not significantly affect the overall tomato fruit quality in the storage period. Our results revealed that PAW combined with sonication had a significant impact on post-harvest agrochemical degradation and retention of tomato quality than PABS. Conclusively, the integrated hurdle technologies effectively reduce agrochemical residues, which helps to lower health hazards and foodborne illnesses.     

基于认识模型建构与应用的化学教学设计*——“水溶液中的离子反应与离子平衡”一轮复习课

分析了“水溶液中的离子反应与离子平衡”主题内容,通过学生前测发现学生对这一部分内容的认识存在着认识水平较低、认识不够深入等问题。针对这一问题,在实际教学中通过构建水溶液中的离子反应与离子平衡认识模型的方式,创设真实的问题情境,引导学生明确任务类型、丰富认识角度、形成认识思路,从而使学生对主题内容的认识走向深入和系统。通过后测,分析了教学效果,进行了教学反思,为在教学实践中开展认识模型建构教学提供参考。     

紫色石蕊溶液配制方法的探究

石蕊溶液在碱性溶液中变色不明显,这个问题虽小,但它一直困扰着我们的实验教学活动。利用手机软件颜色识别器、数字传感器等几种软硬件技术手段,对石蕊试剂的选择、配制方法的优化、溶液pH的调节等方面进行探究,试图配制出在酸碱性溶液中显色明显的石蕊溶液。     

基于真实情境的初中化学微项目教学实践与反思*——以“溶液的形成”为例

以“溶液的形成”为例进行微项目教学实践,选择学生熟悉的护手霜为主题情境,巧妙设计了“原料分散”“微观探秘”“辨识活动”“对比实验”“感知乳化”等系列微项目活动,通过情境不断地设置认知冲突,引导学生反思、修正并最终形成更完善的概念,在环环相扣的探究活动中使学生自主建构结构化的知识。通过制作“护手霜”将“溶解”和“乳化”串联,感知溶液,感受乳化,感悟人与自然、社会的和谐、可持续发展。     

PCB酸性蚀刻液中缓蚀剂对厚铜线路制作的影响

以2-巯基苯并噻唑(2-MBT)、 苯并三氮唑(BTA)和苯氧基乙醇(MSDS)作为缓蚀剂, 研究了其加入在酸性蚀刻液后对PCB厚铜线路的缓蚀效果。通过接触角测试、电化学测试和蚀刻因子得出缓蚀状态,并结合扫描电子显微镜观察铜表面形貌。通过分子动力学计算和量子化学模拟分析缓蚀剂在铜表面的吸附机理。结果表明,2-MBT + MSDS与BTA + MSDS的分子结构可有效地平行吸附在铜表面,且吸附能高于单一缓蚀剂。加入了2-MBT + MSDS的蚀刻液,对厚度约为33 μm铜线路进行刻蚀,铜线路的蚀刻因子提高到6.59,可有效应用于PCB厚铜线路制作。     

水溶液法原位构建ZnO亲锂层稳定锂-石榴石电解质界面

固态电池以其高安全性和高能量密度而备受关注。石榴石型固体电解质(LLZO)由于具有较高的离子导电性和对锂金属的稳定性,在固态电池中具有应用前景,但陶瓷与锂金属较差的界面接触会导致高的界面阻抗和可能形成的枝晶穿透。我们利用LLZO表层独特的H⁺/Li⁺交换反应,提出了一种简便有效的金属盐类水溶液诱发策略,在电解质表面原位构建ZnO亲锂层,界面处LiZn合金化实现紧密连续的接触。引入改性层后,界面阻抗可显著降低至约10Ω·cm²,对称电池能够在0.1mA·cm^-2的电流密度下实现长达1000h的长循环稳定性。匹配正极LiFePO₄(LFP)或LiNi_0.5Co_0.2Mn_0.3O₂(NCM523)的准固态电池在室温下能够稳定循环100次以上。     

初中化学“溶液”的项目式教学*——白砂糖的梦想之路

以“白砂糖的梦想之路”为项目学习主题,呈现了初中化学“溶液”的项目教学案例。基于棒棒糖的制作过程开发了系列学习任务,有助于学生在真实的问题情境中发展核心素养和构建灵活的知识基础。     

Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

Sensitive and Selective Fluorescent and Colorimetric Sensor for Ag+ Based on the Supramolecular Self‐Assembly in Semi‐Water

Specific recognition of ultratrace levels of ions in semi‐water using super‐quicker methods is still a challenge for environmental monitoring. Herein we report a fluorescent and colormetric sensor ( ZH ) based on supramolecular self‐assembly, whose structure was destroyed by the addition of ultratrace of silver ions. The process promoted either naked eye visible color changes or fluorescence intensity quenched in conjunction with a wide pH range. Systematic studies revealed very high selectivity (0.07 µmol/L) for silver ions, and other common cations, e.g ., Hg²⁺, Cu²⁺, Cd²⁺, Pb²⁺ had nearly no influence on the sensing behavior. This sensor also served as a multiple use of component in sensing materials by addition of I⁻ into the mixture of ZH and Ag⁺ (about 5 times). What's more, ZH containing filter paper emerged distinct color and fluorescence changes upon exposure to silver (Ag⁺), which could be used as a portable method to undertake field testing for Ag ⁺ .     

Spherically Symmetric Solvent is Sufficient to Explain the LCST Mechanism in Polymer Solutions

The mechanism of the lower critical solution temperature (LCST) in thermoresponsive polymer solutions has been studied by means of a coarse‐grained single polymer chain simulation and a theoretical approach. The simulation model includes solvent explicitly and thus accounts for solvent interactions and entropy directly. The theoretical model consists of a single chain polymer in an implicit solvent where the effect of solvent is included through the intrapolymer solvophobic potential proposed by Kolomeisky and Widom. The results of this study indicate that the LCST behavior is determined by the competition between the mean energy difference between the bulk and bound solvent, and the entropy loss due to the bound solvent. At low temperatures, solvent molecules are bound to the polymer and the solvophobicity of the polymer is screened, resulting in a coiled state. At high temperatures the entropy loss due to bound solvent offsets the energy gain due to binding which causes the solvent molecules to unbind, leading to the collapse of the polymer chain to a globular state. Furthermore, the coarse‐grained nature of these models indicates that mean interaction energies are sufficient to explain LCST in comparison to specific solvent structural arrangements.